Built for working events
- Tool-Free InstallationNo tools, no hardware kits — the frame walks open by hand.
- Portable & ConvenientFolds into a wheeled roller bag one person can move.
- Quick SetupTwo people go from bag to branded booth in about 60 seconds.
- FrigostableFabric and hardware stay flexible down to -25°C.
- Heavy Duty HardwareReinforced truss and 58 lb-rated joints for daily event use.
- Reliable & DurableCommercial-grade build backed by our satisfaction guarantee.
Frame & hardware details
Click any image to zoom in on the Canopy + Table Cover Package — Craft Fair frame, bag and included hardware.
10x10 Custom Canopy Tent — Craft Fair
SKU: PCT-P3-1010-CF
Starting At $899.00
- • Matching 6 ft stretch table cover included
- • Full-color printed roof and valances
- • 100 sq ft footprint, 6 ft 9 in headroom
- • Lifetime hardware warranty
Product specs
- Material
- 600D Weatherproof Polyester (CPAI-84 Fire Rated)
- Print Method
- Full Color Dye-Sublimation (Edge-to-Edge)
- Dimensions
- 10ft x 10ft (100 Sq. Ft. Coverage)
- Hardware
- 40mm Aluminum Hex Frame
- Setup Time
- Approximately 5 Minutes (2 People)
- Warranty
- Lifetime Hardware Warranty · 2-Year Canopy Material
- Production
- 3–4 business days after artwork approval
Customize This Package
Product Details
A craft fair booth reads as professional when the tent and the table match. This package pairs a full-color custom canopy tent with a printed 6-foot stretch table cover cut from the same artwork, so your booth looks designed instead of assembled. The four-sided fitted cover hides inventory bins underneath while the printed front panel does the selling.
Key Features
- Coordinated Artwork: Tent and table cover are laid out from one design file so colors and logo scale match.
- 4-Sided Stretch Cover: Machine-washable poly-spandex that fits standard 6 ft folding tables wrinkle-free.
- Full-Color Canopy Top: Dye-sublimated roof and valances with unlimited color coverage.
- Craft-Show Compliant: CPAI-84 fire-retardant certification supplied for indoor and outdoor shows.
- Single-Bag Transport: Frame, top and cover pack into one wheeled roller bag.
What do you need for a craft fair booth setup?
A 10x10 canopy tent, one or two 6-foot tables with printed covers, 40 lbs of weight per leg, and vertical display fixtures. The tent and table cover carry your branding; everything else should be neutral so the products stay the focus of the booth.
Experienced sellers add a back table for wrapping and stock, a lockable cash box, and a battery light bar for indoor halls with poor overhead lighting. Keep the front table set back a foot from the tent edge so browsing customers stand under cover — shoppers stay longer when they are out of the sun.
This package is built specifically for craft fair operators running a 10x10 footprint. The mid configuration covers the branded surface most craft fair teams actually use week to week, and it upgrades cleanly — walls, table covers, flags and weight bags all attach to the same frame later without a reprint of the top.
Can you use a pop up canopy indoors?
Yes, provided the top carries CPAI-84 fire-retardant certification, which most venues require in writing. Indoors, replace stakes with weight plates or bags, and check the ceiling height — a 10x10 frame peaks near 11 feet and needs clearance from sprinklers and lighting trusses.
Some halls also cap booth height at 8 feet for line-of-sight reasons. In that case, run the frame at its lowest leg setting or ask us about a low-peak top. Bring the fire certificate as a printed copy; venue fire marshals frequently ask at load-in and will not accept a phone photo at some venues.
Setup and care
Two people set this canopy up in about a minute: walk the frame open from opposite corners, clip the printed top over the truss, then extend the legs one notch at a time so the fabric tensions evenly. Ballast every leg before you load the booth. Clean the top with mild soap and warm water, never a pressure washer, and always pack the fabric dry. Store the frame and top in the included roller bag out of direct sunlight between events.
Related Packages
Frequently Asked Questions
+Does the table cover match the canopy artwork?
Yes. Both pieces are printed from the same design file, so the stripe pattern, brand colors and logo proportions line up between the tent valance and the table front.
+Can this canopy be used indoors at a craft show?
Yes. The top is CPAI-84 fire-retardant certified, which is the documentation convention-center and indoor-market operators ask for. Use weight plates instead of stakes on indoor floors.
+Is the table cover washable?
The poly-spandex cover is machine washable cold and should be hung to dry. Do not iron directly over printed areas.
Customers Also Bought
Complete the setup
This printed canopy tent works hardest when it is not alone: custom table covers dress the counter, feather flags mark the approach, and canopy side walls close the booth off when wind or rain arrives.
Teams working trade shows, festivals and sports events also keep spare tent accessories on hand — sandbags, a wheeled carry bag and replacement parts that fit the same 40mm frame.
Prefer a single line item? Our complete event tent kits bundle the same components by industry, or browse the full product catalog to build it piece by piece.
Prop 65 Warning: This product can expose you to chemicals including DINP, known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.